Slide conversion

Discussion in 'Beyond the Basics' started by boardman, Jan 22, 2005.

  1. boardman

    boardman TPF Noob!

    Joined:
    Jan 20, 2005
    Messages:
    3
    Likes Received:
    0
    Hi

    I'm posting this for a friend in the hope that someone will be able to offer some suggestions. Here is his problem:

    "I have had several slides professionally scanned and burnt on to a CD, this was successful and played on my computer and DVD. I later had some older slides that were 2¼ inch square scanned and burnt on to the same CD in a separate folder, these played on the computer but not the DVD. It came up as Jpeg decoding error.

    They then put the 2 ¼ slides into the original folder, again these played on the computer not the DVD, still came up as Jpeg decoding error.

    They then re-sized these slides to the normal slide size and burnt one on a separate CD but with out success. On my DVD they will show as thumbnail pictures but not full size.

    I have tried another DVD, but no joy. Can anyone help with this, the shop has given up!!"

    Any help will be gratefully recieved.

    Boardman
     
  2. boardman

    boardman TPF Noob!

    Joined:
    Jan 20, 2005
    Messages:
    3
    Likes Received:
    0
    BUMP
     
  3. SiCk

    SiCk TPF Noob!

    Joined:
    Jan 5, 2005
    Messages:
    165
    Likes Received:
    3
    Location:
    Belfast, N.Ireland
    you'd probably be better going to a video forum of some sort.. seems the problem is your DVD writing software, or how your dvd player is decoding.

    www.dvdrhelp.com

    try there.
     
  4. boardman

    boardman TPF Noob!

    Joined:
    Jan 20, 2005
    Messages:
    3
    Likes Received:
    0
    Thanks Sick - will try that.
     

Share This Page