Advice on removing lensboard - Fujinon SW 90mm f8

[msw_photo]

Hi All - brand new to the forum and while I've been into photography forever (including film), I'm new to the use of large format lenses. I just ordered a DaYi 6x12 medium format pano camera and i'm going to use the Fujinon SW 90mm f8 lens on the camera. Have not received the camera or the lens yet but want to get a head start with a question.

Question is: how do i go about removing the lens board from this lens? The board will not be needed as the lens will attach directly to the camera. See pics.

Thank you!

 

[compur]

Unscrew the rear lens group. The forward group can then either be easily removed or will reveal screws or a retaining ring in the board that must be removed first.

 

[msw_photo]

Unscrew the rear lens group. The forward group can then either be easily removed or will reveal screws or a retaining ring in the board that must be removed first.

Sounds simple enough (fingers crossed)! Thanks for your reply.

 

[webestang64]

Nice piece of glass.