Recepticle

[Space Face]

(Canon 5Dsr and MP E-65 with Yongnuo twin head flash and foam diffused head covers).

 

[Space Face]

The focus is where I meant it to be with a very shallow dof. Not a lot of editing done I'm afraid just a few simple, basic tweeks and a crop.

 

[K9Kirk]

This picture is is how I pictured that you wanted me to picture it it for my picture viewing pleasure.

 

[Space Face]

Yes, I had you in mind all the time.

 

[Space Face]

The focus is where I meant it to be with a very shallow dof. Not a lot of editing done I'm afraid just a few simple, basic tweeks and a crop.

The reply this was addressing has been deleted for some reason.

 

[Dean_Gretsch]

Seems you have some phantom replies lately. Better see an exorcist or get one of those voodoo dolls😏

 

[Space Face]

Seems you have some phantom replies lately. Better see an exorcist or get one of those voodoo dolls😏

😂😂I can handle them without divine intervention.😉

I've a good idea who and why, tho I might be wrong. Gotta love trhe interweb and all it's sad curiosities.

 

[jeffashman]

Interesting shot. You seem to be commenting to yourself a lot lately...

 

[Space Face]

Interesting shot. You seem to be commenting to yourself a lot lately...

Thanks.

Aye, it looks that way😁. Somebody made some snyde comments which I replied to but their have been deleted (I presume by Admin but I dunno as I didnt report them). A bit of internet trolling by some limp noodle whose feefees I'd hurt no doubt. You get them from time to time😁😁😁😁

 

[davholla]

Did you make the foam diffused head covers or buy them?
I have the same flash and the plastic ring attachments have broken so be careful with them.

 

[Space Face]

Did you make the foam diffused head covers or buy them?
I have the same flash and the plastic ring attachments have broken so be careful with them.

I bought the head covers and just cut the foam with a Stanley knife to fit into the heads.

Do you mean the fitment rings that screw into the lens that the flash clips on to? I'm sure mine are metal.

 

[Space Face]

This type of thing. The white front cover clips off and you just roughly cut packing foam blocks to fit or roll and fold up the thinner foam sheeting.

 

[davholla]

I bought the head covers and just cut the foam with a Stanley knife to fit into the heads.

Do you mean the fitment rings that screw into the lens that the flash clips on to? I'm sure mine are metal.

No I mean the plastic bit that the flash heads use.

 

[Space Face]

No I mean the plastic bit that the flash heads use.

Ah, got you now. I used to have the Canon one, about £800 back then and I closed my car boot (trunk) lid on it. Ouch!!!! Hence I replaced it with the vastly cheaper Yongnuo which is every bit as good imo.