CONSTANT "BUSY" MESSAGE ON MY CANON 40D. ANY SUGGETIONSON HOW TO FIX?

[sdm19]

I shot with a remote on a shoot and it has been giving me problems ever since. The "busy" message will not go away. I have tried new batteries and cards and still the same "busy" message. Any help or suggestions would be appreciated. I don't want to send it to Canon if i don't have to.
Thanks!
Steve

 

[KmH]

Online, all caps is tantamount to shouting and is considered by many to be poor netiquette.

You shot with a remote what on a shoot? A remote shutter release, a remote flash unit, a remote display?

It's most likely user error and you have inadvertantly changed a camera setting. Have you referenced your 40D users manual?

I recommend you use the "Reset to default settings" instructions found on page 44 of your users manual.

 

[table1349]

Online, all caps is tantamount to shouting and is considered by many to be poor netiquette.

You shot with a remote what on a shoot? A remote shutter release, a remote flash unit, a remote display?

It's most likely user error and you have inadvertantly changed a camera setting. Have you referenced your 40D users manual?

I recommend you use the "Reset to default settings" instructions found on page 44 of your users manual.

Is is ok for is old codgers with hearing loss to "Shout" once in a while?:lmao:

 

[sdm19]

Thank you for the help. Sorry i am new to this. Thanks for letting me know about the caps!

I used a shutter release remote.

 

[KmH]

Did the 'reset to default settings' (page 44) address your issue?