cytorg
TPF Noob!
- Joined
- Mar 2, 2017
- Messages
- 6
- Reaction score
- 0
- Can others edit my Photos
- Photos NOT OK to edit
Hello, I have been trying to do a multi flash system using a Nikon D7200 and Sb 910's and a Sb 700 in manual mode. I have followed the instructions on making the camera the commander and setting built-in set to "- -" Group A and Group B to M @ 1/1 with it set to channel 1. I have set the flashes appropriately but my problem is my flashes are firing at the lowest setting even though they are 1/1. Flashes are going through a small soft-box or umbrella. My meter keeps reading under though my camera is set to 1/60th, ISO 200. Meter is set the same. If I hit the flash test button I pull f8 on umbrella and f5.6 with the soft-box. I have spent days double checking manuals and settings and it is a no go. This is with all flashes so it is not the flash, and as I stated the camera is set according to instructions. They are firing but just way to low like 1/128th. Flash hooked to the hot shoe works fine, I can adjust the power with no problem. I have also tried this with my D7100 with the same results.
What could I possibly be doing wrong? I'm totally stumped.
Thanks!
What could I possibly be doing wrong? I'm totally stumped.
Thanks!