What's new

How to capture sharp photos?

alfonse1008

TPF Noob!
Joined
Jun 20, 2018
Messages
8
Reaction score
1
Do I need steady hand to capture very sharp photos?


Sent from my iPhone using Tapatalk
 
Hold your elbows against your body and try not to jerk the camera when you click the shutter. Breath and relax.
 
Depends on the subject, the lens' focal length and the shutter speed you're using.

But generally, the ability to hold a camera steady helps.

Thank you [emoji4]


Sent from my iPhone using Tapatalk
 
As a general rule, when handholding a camera, don't let the shutter speed drop lower than the reciprocal of the focal length.

Consequently, if you're shooting at 100mm, your shutter speed should not dip below 1/100 of a second. If you're shooting at 28mm your shutter speed should not dip below 1/30 of a second. If you're shooting at 500mm then your shutter should not be slower than 1/500 of a second. Et Cetera.

With practice and learning slow shutter shooting techniques, you should be able to handhold your camera utilizing shutter speeds under the rule. Additionally, if your camera/lenses has IS, you should be able to significantly shoot under the rule at well.
 
As a general rule, when handholding a camera, don't let the shutter speed drop lower than the reciprocal of the focal length.

Consequently, if you're shooting at 100mm, your shutter speed should not dip below 1/100 of a second. If you're shooting at 28mm your shutter speed should not dip below 1/30 of a second. If you're shooting at 500mm then your shutter should not be slower than 1/500 of a second. Et Cetera.

With practice and learning slow shutter shooting techniques, you should be able to handhold your camera utilizing shutter speeds under the rule. Additionally, if your camera/lenses has IS, you should be able to significantly shoot under the rule at well.

Thank you very much Gary [emoji4]
 
IS - image stabilization - is not as capable as often thought.
Once shutter speed is faster than about 1/500 of a second IS becomes ineffective because the IS system can't move fast enough.
Plus, one needs to be aware if the IS system is in the camera at the image sensor, or in the lens.
Image stabilization - Wikipedia
Nikon VR explained
 
When I first taking photos. I had noticed that my photos was a bit blurry. So done a load of practicing with the shutter speed. I do agree with Gary.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account on our community. It's easy!

Log in

Already have an account? Log in here.

New Topics

Back
Top Bottom