What's new

Interfit Receivers - Any good?

jwbryson1

TPF Noob!
Joined
Apr 21, 2011
Messages
4,280
Reaction score
949
Can others edit my Photos
Photos OK to edit
I got 2 Yongnuo 560 flashes for Xmas and a B&H gift card, and I am now looking for a wireless receiver/transmitter combo to use with the flashes off camera. I found this set at B&H and it gets good reviews.

Interfit Strobies iSync 4 Wireless Transmitter/Receiver STR130

Does anybody have experience with these? They are fairly inexpensive and may be a great way to get started with my additional Yongy flashes without breaking the bank.

Thanks for looking.
 
Thanks. I have not heard good things about the Cowboy stuff in terms of reliability. I was leaning towards high end transceivers but some folks on this forum have convinced me not to spend the $$$ on them. I thought these might be a good middle ground.
 
i dont mind spending the $ if it actually does something more. If it is just triggering flash in manual mode... dont bother.
 
Good point.
 
I have a set of ct-04 manual triggers. No issues here and they sync up to 1/1000 as long as your camera can do it.
 
I ended up buying the Cowboy Studios units from Amazon that Schwettylens suggested. All in I spent only $50 and I was fully prepared to buy the Pocket Wizards for a HUGE amount. I'm glad I thought twice about that. Now I can spend that extra $$$ on some soft boxes and other lighting equipment from B&H.
 
Pocket wizards are nice when you need ttl, range, or extreme HSS. Other than that, close range, manual flashes, etc- regular ol wireless set up does the trick. Good luck !
 
Now I'm wondering this: Will the wireless transmitter that sits in the camera hot shoe block the pop up flash on my D90 from working? I need the pop up flash to trigger my SB-700 unless I get a third receiver.

Anybody have a clue on that?
 
Or you can trigger the sb700 and turn the 560 to s2 mode and activate them via slave mode.
 
It will. Buy another receiver.
I'm sorry--if it "will" then why do I need to buy another receiver??
I'm pretty sure you can use the sb700 to trigger the yn. Reason I said get another reciever, would be to mount your sb700 if you don't wish to use the commander/slave modes of the flashes you have, then you can use the transmitter on the camera and not bother using the pop up flash.
 

Most reactions

Back
Top Bottom