What's new

Interfit Receivers - Any good?

jwbryson1

TPF Noob!
Joined
Apr 21, 2011
Messages
4,280
Reaction score
949
Can others edit my Photos
Photos OK to edit
I got 2 Yongnuo 560 flashes for Xmas and a B&H gift card, and I am now looking for a wireless receiver/transmitter combo to use with the flashes off camera. I found this set at B&H and it gets good reviews.

Interfit Strobies iSync 4 Wireless Transmitter/Receiver STR130

Does anybody have experience with these? They are fairly inexpensive and may be a great way to get started with my additional Yongy flashes without breaking the bank.

Thanks for looking.
 
Thanks. I have not heard good things about the Cowboy stuff in terms of reliability. I was leaning towards high end transceivers but some folks on this forum have convinced me not to spend the $$$ on them. I thought these might be a good middle ground.
 
i dont mind spending the $ if it actually does something more. If it is just triggering flash in manual mode... dont bother.
 
Good point.
 
I have a set of ct-04 manual triggers. No issues here and they sync up to 1/1000 as long as your camera can do it.
 
I ended up buying the Cowboy Studios units from Amazon that Schwettylens suggested. All in I spent only $50 and I was fully prepared to buy the Pocket Wizards for a HUGE amount. I'm glad I thought twice about that. Now I can spend that extra $$$ on some soft boxes and other lighting equipment from B&H.
 
Pocket wizards are nice when you need ttl, range, or extreme HSS. Other than that, close range, manual flashes, etc- regular ol wireless set up does the trick. Good luck !
 
Now I'm wondering this: Will the wireless transmitter that sits in the camera hot shoe block the pop up flash on my D90 from working? I need the pop up flash to trigger my SB-700 unless I get a third receiver.

Anybody have a clue on that?
 
Or you can trigger the sb700 and turn the 560 to s2 mode and activate them via slave mode.
 
It will. Buy another receiver.
I'm sorry--if it "will" then why do I need to buy another receiver??
I'm pretty sure you can use the sb700 to trigger the yn. Reason I said get another reciever, would be to mount your sb700 if you don't wish to use the commander/slave modes of the flashes you have, then you can use the transmitter on the camera and not bother using the pop up flash.
 

Most reactions

New Topics

Back
Top Bottom