What's your Ctrl+V hiding?

[unpopular]

But you're really not all that, either.

 

[snowbear116 47]

1. Close all the vehicle doors.
2. Insert the ignition key into the ignition lock cylinder.
3. Press and hold the door unlock switch.
4. While holding the door lock switch in the unlock position, cycle
the ignition ON, OFF, ON, OFF.
5. Release the door unlock switch. The doors will lock and unlock to
confirm the program mode.
6. Press and hold the LOCK button and the UNLOCK button
simultaneously on one transmitter. After a delay of approximately 15
seconds, the doors will lock and unlock to confirm the programming of
that transmitter.
7. Repeat the previous step to program up to four transmitters.
8. Turn the ignition switch to the RUN position in order to exit the
keyless entry transmitter mode.
9. Operate the transmitter functions in order to verify correct
system operation.

Programming/activation instructions for my truck's key fob. Sorry - no porn here.

 

[Haya.H]

Not bad for a first go at street photography.

Can you please number them? way too hard to make individual critiques as is.

In general a lot of these just had way too much going on, and in focus. An image with too much in it in many ways is the same as having an image with nothing in it.

Notice that your two strongest images, the woman and the duck, and the single man in front of the wall, were also the images with the fewest visual elements. That's not to say that less is always better, but you definitely tended to skew on the 'too busy' side of things with your compositions.

In street photography a lot of times the people are moving enough that you mostly have to stake out your background first, and then wait for a subject. Cities are hectic places and if you aren't very conscious of your background, you end up with too busy backgrounds in almost all your photographs. It's sort of backwards from normal people photography where the subject is established and we hunt backgrounds. In a lot of ways this is part of what HC-B meant by 'waiting for the decisive moment' stake out your ground, know what you are looking for, and then... just wait for it.

Was trying to quote two people in one comment, still not sure if this is the way to do it but it's how I do it

 

[480sparky40 40]

You mean the "reveal" site in Compaq's original post? That was just HIS Ctrl-V. It's what he had most recently copied and pasted, presumably because he wasn't sure of the english translation for how you say "reveal" in Norwegian.

OOooooh! Well, duh!

So, just press control+v and post what comes up, huh?

Well, that's kinda hard to do in my case. I have a choice.

 

[Compaq]

A choice between what?

 

[laynea24]

1Z5154E70341118249

Now you can all join me in tracking my package! Lol.

 

[Ernicus]

I'd hit it



um....no comment.


This is a dangerous game when you are chatting via messenger. lol

 

[480sparky40 40]

A choice between what?

Which item I have in my clipboard. I have several choices.

 

[Espike]

A choice between what?

Which item I have in my clipboard. I have several choices.

I think the spirit of the thread is that you hit CTRL+V and post whatever is there, good, bad, or otherwise.

 

[480sparky40 40]

A choice between what?

Which item I have in my clipboard. I have several choices.

I think the spirit of the thread is that you hit CTRL+V and post whatever is there, good, bad, or otherwise.

This is my first choice:

Proposal for -------------





Re: Proposal for: Remodel of space -----------



Proposal for the following electrical work in the City of Des Moines:



Remove all electrical wiring above grid ceiling in back room, reroute existing conduits, reinstall existing 2x4 troffer lights.

Remove existing low-voltage cables above ceiling.

Add 2 120v 20a receptacles, one in conference room, one in office.

Add 5 120v circuits for work stations, each station provided with (2) duplex receptacles.

Add 32 Cat5 drops from closet to stations, each station provided with (2) drops. No terminations.

Add (3) 120v 20a receptacles for mini-kitchen (small ref., micro, coffee maker).



Total for above described work: $x,xxx.00.



Price includes all material, labor, permits & inspections.






(certain proprietary information deleted)

 

[Kazooie]

Realy, a photo?

 

[Sw1tchFX]

1Z5154E70341118249

(laynea24's package lol)

 

[unpopular]

^^ you really may want to censor that one, if you haven't already. One could access personal information through it, or worse, deliver 500 pizzas on your behalf.

 

[Tony S]

Can't paste anything... the paste option is grayed out.

 

[PinkDoor]

Ernicus


LOL!!! That was from my TFP Flight Club voting this morning because I was too lazy to type out the names!