Don Kondra
Been spending a lot of time on here!
- Joined
- Dec 11, 2007
- Messages
- 1,637
- Reaction score
- 904
- Location
- Saskatoon, Saskatchewan, Canada
- Website
- donkondra.weebly.com
- Can others edit my Photos
- Photos NOT OK to edit
I'd like to share my relatively inexpensive foray into cross polarization.
I purchased 4' long x 17" wide piece of film from here.
Including shipping to Canada the cost was $90, that's enough material (17" x 16") for three 20" x 20" softboxes. The intended use is smallish product.
I also purchased an off shore lens collar for the 70-200mm (ebay $20), Hoya Pro 1 CP filters (ebay $140) and rubber lens hoods (ebay $10) for the 24-70mm and 70-200mm.
To attach the film to the softboxes I basically cut a hole in white foam core a 1/2" smaller than the film and taped it to the opening, then hot glued a 2" wide border around the panel.
A simple paper clip holds the frame on the softbox.
First test shot with a handmade ebony pen in landscape orientation to check for vignetting.
Very minor editing...
Next was a test shot in portrait mode with a pen that was handmade for me as a gift. The pen blank is made up of shredded $50 bills in resin.
Credit to Mack Cameron, the pen maker..
BTW - the reflections on the collars on this pen drove me crazy until I viewed it closely in natural light and noticed they are indeed faceted.
I'm not sure of the math when the lights are reflected onto the subject or used from above but I do know this bit of "kit" will be very useful in my work.
Cheers, Don
I purchased 4' long x 17" wide piece of film from here.
Including shipping to Canada the cost was $90, that's enough material (17" x 16") for three 20" x 20" softboxes. The intended use is smallish product.
I also purchased an off shore lens collar for the 70-200mm (ebay $20), Hoya Pro 1 CP filters (ebay $140) and rubber lens hoods (ebay $10) for the 24-70mm and 70-200mm.
To attach the film to the softboxes I basically cut a hole in white foam core a 1/2" smaller than the film and taped it to the opening, then hot glued a 2" wide border around the panel.
A simple paper clip holds the frame on the softbox.
First test shot with a handmade ebony pen in landscape orientation to check for vignetting.
Very minor editing...
Next was a test shot in portrait mode with a pen that was handmade for me as a gift. The pen blank is made up of shredded $50 bills in resin.
Credit to Mack Cameron, the pen maker..
BTW - the reflections on the collars on this pen drove me crazy until I viewed it closely in natural light and noticed they are indeed faceted.
I'm not sure of the math when the lights are reflected onto the subject or used from above but I do know this bit of "kit" will be very useful in my work.
Cheers, Don